Synthesis mechanism from graphene quantum dots to carbon nanotubes by ion-sputtering assisted chemical vapor deposition.

We present the first work of the synthesis mechanism from graphene quantum dots (GQDs) to carbon nanotubes (CNTs) by an ion-sputtering assisted chemical vapor deposition. During the annealing process, a Pt thin film deposited by the ion-sputtering was dewetted and agglomerated to form many nanometer-sized particles, leading to Pt nanoparticles (PtNPs) that can act as catalysts for creating carbon allotropes. The shape of the allotropes can be effectively tailored from GQDs to CNTs by controlling three key parameters such as the dose of catalytic ions (D), amounts of carbon source (S), and thermal energy (T). In our work, it was clearly proved that the growth control from GQDs to CNTs has a comparably proportional relationship with D and S, but has a reverse proportional relationship with T. Furthermore, high-purity GQDs without any other by-products and the CNTs with the cap of PtNPs were generated. Their shapes were appropriately controlled, respectively, based on the established synthesis mechanism.

Recent Progress of Advanced Functional Separators in Lithium Metal Batteries.

As a representative in the post-lithium-ion batteries (LIBs) landscape, lithium metal batteries (LMBs) exhibit high-energy densities but suffer from low coulombic efficiencies and short cycling lifetimes due to dendrite formation and complex side reactions. Separator modification holds the most promise in overcoming these challenges because it utilizes the original elements of LMBs. In this review, separators designed to address critical issues in LMBs that are fatal to their destiny according to the target electrodes are focused on. On the lithium anode side, functional separators reduce dendrite propagation with a conductive lithiophilic layer and a uniform Li-ion channel or form a stable solid electrolyte interphase layer through the continuous release of active agents. The classification of functional separators solving the degradation stemming from the cathodes, which has often been overlooked, is summarized. Structural deterioration and the resulting leakage from cathode materials are suppressed by acidic impurity scavenging, transition metal ion capture, and polysulfide shuttle effect inhibition from functional separators. Furthermore, flame-retardant separators for preventing LMB safety issues and multifunctional separators are discussed. Further expansion of functional separators can be effectively utilized in other types of batteries, indicating that intensive and extensive research on functional separators is expected to continue in LIBs.

Face-Dependent Reconstruction of Bi-Oxyiodides toward Selective Growth of (BiO)2 CO3 Edge Side to Maximize CO2 Conversion Efficiency.

Chemical reconstruction of bismuth oxyiodides using bicarbonates is tried to selectively grow (BiO)2 CO3 edge side. Orthorhombic o-Bi5 O7 I undergoes a total reconstruction process by its phase transformation into tetragonal (BiO)2 CO3 (BOC-o) to form a well-aligned nanosheet array with maximally exposing CO3 2- moiety at the edge side. The post-reconstruction BOC-o catalyst achieved 100 % Faradaic efficiency at -0.86 V vs. RHE for CO2 -to-formate conversion. However, another conservative reconstruction of tetragonal t-BiOI into tetragonal (BiO)2 CO3 (BOC-t) exposed majorly a less reactive [BiO]+ layer. At low overpotential regions, the catalytic cycle of BOC-o begins with the initial conversion of the CO3 2- moiety into formate at the [-OBi-(CO3 )-BiO-] site, but at high overpotential regions, the [BiO]+ layer undergoes reduction to metallic Bi and multi-catalytic species proceed with CO2 reduction. Otherwise, the deactivation of Bi+ site by an organic molecule switched on another catalysis of proton reduction, preventing CO2 reduction.

Two-Electron-Induced Reorganization of Cobalt Coordination and Metal-Ligand Cooperative Redox Shifting Co(I) Reactivity toward CO2 Reduction.

Electrochemical reorganization of complex structures is directly related to catalytic reactivity; thus, the geometric changes of catalysts induced by electron transfer should be considered to scrutinize the reaction mechanism. Herein, we studied electron-induced reorganization patterns of six-coordinate Co complexes with neutral N-donor ligands. Upon two-electron transfer into a Co center enclosed within a bulky π-acceptor ligand, the catalytic site exhibited different reorganization patterns depending on the ligand characteristics. While a bipyridyl ligand released Co-bound solvent (CH3CN) to open a reaction site, a phenanthroline ligand caused Co-Narm (side "arm" of NNN-ligand) bond dissociation. The first electron transfer occurred in the Co(II/I) reduction step and the second electron entered the bulky π-acceptor, of which redox steps were assigned from cyclic voltammograms, magnetic moment measurements, and DFT calculations. In comparison, the Co complex of [NNNNCH3-Co(CH3CN)3](PF6)2 ([1-(CH3CN)3](PF6)2) showed a high H2 evolution reactivity (HER), whereas a series of Co complexes with bulky π-acceptors such as [NNNNCH3-Co(L)(CH3CN)](PF6)2 (L = phen ([2-CH3CN](PF6)2), bpy ([3-CH3CN](PF6)2), [NNNNCH3-Co(tpy)](PF6)2 ([4](PF6)2), and [NNNCH2-Co(phen)(CH3CN)](PF6)2 ([5-CH3CN](PF6)2)) suppressed the HER but rather enhanced the CO2 reduction reaction. The metal-ligand cooperative redox steps enabled the shift of Co(I) reactivity toward CO2 reduction. Additionally, the amine pendant attached to the NNNNCH3-ligand could stabilize the CO2 reduction intermediate through the hydrogen-bonding interaction with the Co-CO2H adduct.

Scaffold-based [Fe]-hydrogenase model: H2 activation initiates Fe(0)-hydride extrusion and non-biomimetic hydride transfer.

We report the synthesis and reactivity of a model of [Fe]-hydrogenase derived from an anthracene-based scaffold that includes the endogenous, organometallic acyl(methylene) donor. In comparison to other non-scaffolded acyl-containing complexes, the complex described herein retains molecularly well-defined chemistry upon addition of multiple equivalents of exogenous base. Clean deprotonation of the acyl(methylene) C-H bond with a phenolate base results in the formation of a dimeric motif that contains a new Fe-C(methine) bond resulting from coordination of the deprotonated methylene unit to an adjacent iron center. This effective second carbanion in the ligand framework was demonstrated to drive heterolytic H2 activation across the Fe(ii) center. However, this process results in reductive elimination and liberation of the ligand to extrude a lower-valent Fe-carbonyl complex. Through a series of isotopic labelling experiments, structural characterization (XRD, XAS), and spectroscopic characterization (IR, NMR, EXAFS), a mechanistic pathway is presented for H2/hydride-induced loss of the organometallic acyl unit (i.e. pyCH2-C[double bond, length as m-dash]O → pyCH3+C[triple bond, length as m-dash]O). The known reduced hydride species [HFe(CO)4]- and [HFe3(CO)11]- have been observed as products by 1H/2H NMR and IR spectroscopies, as well as independent syntheses of PNP[HFe(CO)4]. The former species (i.e. [HFe(CO)4]-) is deduced to be the actual hydride transfer agent in the hydride transfer reaction (nominally catalyzed by the title compound) to a biomimetic substrate ([TolIm](BArF) = fluorinated imidazolium as hydride acceptor). This work provides mechanistic insight into the reasons for lack of functional biomimetic behavior (hydride transfer) in acyl(methylene)pyridine based mimics of [Fe]-hydrogenase.

Electrochemical behaviors of a pincer-type NNN-Fe complex and catalytic H2 evolution activity.

We describe electrochemical reactivity of a pincer-type [NNN-Fe(tBuNC)3](ClO4)2 complex. Upon electron reduction, the Fe(i) species experienced disproportionation to Fe(0) and Fe(ii). An electron-reduced Fe center dissociated a tBuNC ligand to make an open coordination site, where a proton could be transferred. The low-spin Fe center, assisted by isocyanide and a pyridine-based NNN-pincer ligand, catalyzed efficiently the proton reduction reaction. Also, a Lewis basic amine site in the side 'arm' of the NNN-pincer ligand lowered the free energy for the protonation of an Fe center during the proton reduction process. DFT calculations provided insight into a plausible catalytic pathway.

GdFeO3 Perovskite Oxide Decorated by Group X Heterometal Oxides and Bifunctional Oxygen Electrocatalysis.

Bifunctional electrocatalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are necessary in the renewable energy systems. However, the kinetically slow and large energy-demanding procedures of oxygen electrocatalysis make the preparation of bifunctional catalysts difficult. In this work, we report a novel hierarchical GdFeO3 perovskite oxide of a spherelike nanostructure and surface modification with the group X heterometal oxides. The nanostructured GdFeO3 layer behaved as a bifunctional electrocatalyst in the oxygen electrocatalysis of OER and ORR. Moreover, the surface decoration with catalytically active PtOx + Ni/NiO nanoparticles enhanced the electrocatalytic performances substantially. Incorporation of mesoporous PtOx + Ni/NiO nanoparticles into the porous GdFeO3 nanostructure enlarged the electrochemically active surface area and provided the interconnected nanostructures to facilitate the OER/ORR. The nanostructures were visualized by scanning electron microscopy and transmission electron microscopy images, and the surface area and pore size of nanoparticles were analyzed from N2 adsorption/desorption isotherms. Tafel analysis indicates that surface modification effectively improves the kinetics of oxygen reactions and accordingly increases the electrocatalytic efficiency. Finally, the 2 wt % PtOx + NiO|GdFeO3 (x = 0, 1, and 2) electrode achieved the enhanced OER performance with an overpotential of 0.19 V at 10 mA/cm2 in an alkaline solution and a high turnover frequency of 0.28 s-1 at η = 0.5 V. Furthermore, the ORR activity is observed with an onset potential of 0.80 V and a half-wave potential (E1/2) of 0.40 V versus reversible hydrogen electrode.

Reactivity of a biomimetic W(iv) bis-dithiolene complex with CO2 leading to formate production and structural rearrangement.

A mononuclear W(iv) bis-dithiolene complex stabilized by an oxo ligand shows a reductive reactivity toward CO2, from which formate and a dinuclear W(v) complex are generated. An unusual structural rearrangement was observed during the reaction. Structural and spectroscopic characterization for a novel triply bridged dinuclear W(v) complex is reported.

Structural and functional synthetic model of mono-iron hydrogenase featuring an anthracene scaffold.

Mono-iron hydrogenase was the third type of hydrogenase discovered. Its Lewis acidic iron(II) centre promotes the heterolytic cleavage of the H-H bond and this non-redox H2 activation distinguishes it from the well-studied dinuclear [FeFe] and [NiFe] hydrogenases. Cleavage of the H-H bond is followed by hydride transfer to the enzyme's organic substrate, H4MPT+, which serves as a CO2 'carrier' in methanogenic pathways. Here we report a scaffold-based synthetic approach by which to model mono-iron hydrogenase using an anthracene framework, which supports a biomimetic fac-C,N,S coordination motif to an iron(II) centre. This arrangement includes the biomimetic and organometallic Fe-C σ bond, which enables bidirectional activity reminiscent of the native enzyme: the complex activates H2 under mild conditions, and catalyses C-H hydride abstraction plus H2 generation from a model substrate. Notably, neither H2 activation nor C-H hydride abstraction was observed in the analogous complex with a pincer-type mer-C,N,S ligation, emphasizing the importance of the fac-C,N,S-iron(II) motif in promoting enzyme-like reactivity.

H2 Photogeneration Using a Phosphonate-Anchored Ni-PNP Catalyst on a Band-Edge-Modified p-Si(111)|AZO Construct.

We report the fabrication of a {semiconductor}|{metal oxide}|{molecular catalyst} construct for the photogeneration of dihydrogen (H2) under illumination, including band-edge modulation of the semiconductor electrode depending on the identity of Si(111)-R and the metal oxide. Briefly, a synergistic band-edge modulation is observed upon (i) the introduction of a p-Si|n-AZO heterojunction and (ii) introduction of an organic dimethoxyphenyl (diMeOPh) group at the heterojunction interface; the AZO also serves as a transparent and conductive conduit, which was capped with an ultrathin layer (20 Å) of amorphous TiO2 for stability. A phosphonate-appended PNP ligand and its Ni complex were then adsorbed to the p/n heterojunction for photoelectrochemical H2 generation (figures of merit: Vonset ≈ + 0.03 V vs NHE, Jmax ≈ 8 mA cm(-2) at 60 mM TsOH).

Photoelectrochemical operation of a surface-bound, nickel-phosphine H2 evolution catalyst on p-Si(111): a molecular semiconductor|catalyst construct.

We demonstrate the covalent attachment and catalytic function of a nickel-phosphine H2 evolution catalyst to a p-Si(111) photoelectrode. The covalently assembled semiconductor|molecular construct achieves a synergistic improvement (ΔVonset = +200 mV) as compared to a solution of [(PNP)2Ni](2+) in contact with a p-Si(111)-CH3 photoelectrode.

Hybrid organic/inorganic band-edge modulation of p-Si(111) photoelectrodes: effects of R, metal oxide, and Pt on H2 generation.

The efficient generation of dihydrogen on molecularly modified p-Si(111) has remained a challenge due to the low barrier heights observed on such surfaces. The band-edge and barrier height challenge is a primary obstruction to progress in the area of integration of molecular H2 electrocatalysts with silicon photoelectrodes. In this work, we demonstrate that an optimal combination of organic passivating agent and inorganic metal oxide leads to H2 evolution at photovoltages positive of RHE. Modulation of the passivating R group [CH3 → Ph → Naph → Anth → Ph(OMe)2] improves both the band-edge position and ΔV (Vonset - VJmax). Subsequent atomic layer deposition (ALD) of Al2O3 or TiO2 along with ALD-Pt deposition results in to our knowledge the first example of a positive H2 operating potential on molecularly modified Si(111). Mott-Schottky analyses reveal that the flat-band potential of the stable Ph(OMe)2 surface approaches that of the native (but unstable) hydride-terminated surface. The series resistance is diminished by the methoxy functional groups on the phenyl unit, due to its chemical and electronic connectivity with the TiO2 layer. Overall, judicious choice of the R group in conjunction with TiO2|Pt effects H2 generation on p-Si(111) photoelectrodes (Voc = 207 ± 5.2 mV; Jsc = -21.7 mA/cm(2); ff = 0.22; ηH2 = 0.99%). These results provide a viable hybrid strategy toward the operation of catalysts on molecularly modified p-Si(111).

Prevalence of Trichomonas vaginalis by PCR in men attending a primary care urology clinic in South Korea.

Trichomonas vaginalis, a causative agent of trichomoniasis, may trigger symptomatic or asymptomatic nongonococcal urethritis and chronic prostatitis in men. Despite the availability of highly sensitive diagnostic tests, such as nucleic acid amplification tests, including PCR, few prospective studies present data on male T. vaginalis infection in South Korea. In the present study, the prevalence of T. vaginalis and associated clinical conditions were evaluated in 201 male patients from a primary care urology clinic in South Korea. The prevalence of T. vaginalis infection in our cohort was 4% (8/201) by PCR. T. vaginalis infection was common in men older than 40 years (median age, 52 years). Among the 8 Trichomonas-positive patients, 87.5% (7/8) had prostatic diseases, such as prostatitis and benign prostatic hyperplasia, and 25.0% (2/8) and 12.5% (1/8) were coinfected with Chlamydia trachomatis and Mycoplasma genitalium, respectively. Our results suggest that T. vaginalis infection is not rare in men attending primary care urology clinics in South Korea, especially in those older than 40 years, in whom it may explain the presence of prostatic disease. The possibility of T. vaginalis infection should be routinely considered in older male patients with prostatic diseases in South Korea.

Deoxygenation of mono-oxo bis(dithiolene) Mo and W complexes by protonation.

Protonation-assisted deoxygenation of a mono-oxo molybdenum center has been observed in many oxotransferases when the enzyme removes an oxo group to regenerate a substrate binding site. Such a reaction is reported here with discrete synthetic mono-oxo bis(dithiolene) molybdenum and tungsten complexes, the chemistry of which had been rarely studied because of the instability of the resulting deoxygenated products. An addition of tosylic acid to an acetonitrile solution of [Mo(IV)O(S2C2Ph2)2](2-) (1) and [W(IV)O(S2C2Ph2)2](2-) (2) results in the loss of oxide with a concomitant formation of novel deoxygenated complexes, [M(MeCN)2(S2C2Ph2)2] (M = Mo (3), W (4)), that have been isolated and characterized. Whereas protonation of 1 exclusively produces 3, two different reaction products can be generated from 2; an oxidized product, [WO(S2C2Ph2)2](-), is produced with 1 equiv of acid while a deoxygenated product, [W(MeCN)2(S2C2Ph2)2] (4), is generated with an excess amount of proton. Alternatively, complexes 3 and 4 can be obtained from photolysis of [Mo(CO)2(S2C2Ph2)2] (5) and [W(CO)2(S2C2Ph2)2] (6) in acetonitrile. A di- and a monosubstituted adducts of 3, [Mo(CO)2(S2C2Ph2)2] (5) and [Mo(PPh3)(MeCN)(S2C2Ph2)2] (7) are also reported.

O-atom exchange between H2O and CO2 mediated by a bis(dithiolene)tungsten complex.

Inspired by the CO(2)-reductatse activity of tungsten-dependent formate dehydrogenases (W-FDHs), a reduced W-FDH model, [W(IV)(OH)(S(2)C(2)Ph(2))(2)](-), was prepared in situ through hydrolysis of [W(IV)(OPh)(S(2)C(2)Ph(2))(2)](-) (1) and its reactivity with CO(2) was investigated. The reaction between [W(IV)(OH)(S(2)C(2)Ph(2))(2)](-) and CO(2) at room temperature leads to the formation of [W(IV)(O)(S(2)C(2)Ph(2))(2)](2-) (2), which slowly oxidizes to [W(V)(O)(S(2)C(2)Ph(2))(2)](-) (3). Isotopic labeling experiments reveal that the O atom in CO(2) incorporates into 3. This implies that there is carbonic anhydrase like activity, in which carbonation and decarboxylation are mediated by a bis(dithiolene)tungsten complex.

Mercury(II) triflate-catalyzed cycloisomerization of allenynes to allenenes.

Cycloisomerizations of allenynes to allenenes have been studied in the presence of catalytic amounts of [Hg(OTf)2] in acetonitrile. The catalytic system is quite effective for terminal 1,6-allenynes: allenenes were obtained in reasonable to high yields. However, treatment of allenynes with disubstituents at the allenic terminal carbon yielded a triene and/or allenene as a major product(s) depending upon the substituents.